This documentation assumes that you already have an instance of Apache properly configured for SSL/TLS, including the necessary private key and certificate, and that Guacamole has already been installed using Glyptodon Enterprise. If you do not already have an instance of Apache ready, please set up an instance of Apache before proceeding. If you do not already have Guacamole installed, please see the installation instructions.

SSL termination is the recommended method of encrypting communication between users’ browsers and Guacamole, and involves configuring a reverse proxy like Nginx or Apache to handle strictly the SSL/TLS portion of the conversation with the Tomcat instance hosting Guacamole, handling encrypted HTTP externally while passing unencrypted HTTP to Tomcat internally.

Proxying Guacamole through Apache

If Apache has been configured for SSL/TLS, there should be a <VirtualHost> section within this configuration that defines the certificate and private key used by Apache, and which requires Apache to listen on the standard HTTPS port (443). To proxy Guacamole through Apache such that Guacamole communication is encrypted, two additional <Location> sections will need to be added within this <VirtualHost> section:

<Location />
    Order allow,deny
    Allow from all
    ProxyPass http://HOSTNAME:8080/ flushpackets=on
    ProxyPassReverse http://HOSTNAME:8080/

<Location /websocket-tunnel>
    Order allow,deny
    Allow from all
    ProxyPass ws://HOSTNAME:8080/websocket-tunnel
    ProxyPassReverse ws://HOSTNAME:8080/websocket-tunnel

where “HOSTNAME” is the hostname or IP address of the internal Guacamole server.

These <Location> sections configure proxying of the HTTP and WebSocket protocols respectively. Apache handles the HTTP and WebSocket protocols separately, and thus requires separate configuration for the portion of the web application which uses WebSocket. Both sections are required for Guacamole to work correctly behind Apache, and the mod_proxy_wstunnel module must be installed and enabled.

Of particular importance is the flushpackets=on option within the ProxyPass directive used for HTTP in front of Guacamole. This option disables buffering of packets sent to/from Guacamole. By default, Apache will buffer communication between itself and the browser, effectively disrupting the stream of events and updates required for remote desktop. Without disabling buffering, the Guacamole connection will at best be slow, and at worst not function at all.

Applying the updated Apache configuration

After the above changes have been made, Apache must be reloaded to force rereading of its configuration files:

$ sudo systemctl reload httpd

If you are using SELinux (the default on both CentOS and RHEL), you must also configure SELinux to allow HTTPD implementations like Apache to establish network connections:

$ sudo setsebool -P httpd_can_network_connect 1

If Guacamole is not accessible through Apache after the service has been reloaded, check the Apache logs and/or journalctl to verify that the syntax of your configuration changes is correct. Such errors will result in Apache refusing to reload its configuration, or refusing to start up entirely. If you do not see any errors from Apache, verify that you have configured SELinux to allow Apache to connect to the network and check the SELinux audit logs (/var/log/audit/audit.log) for AVC denials.

Configuring Tomcat to trust "X-Forwarded-For" from Apache

For the client address sent by Apache via "X-Forwarded-For" to be correctly trusted as the true client address, you will need to add a "RemoteIpValve" entry within /etc/tomcat/server.xml. If this is not specified, the client address will be logged as the address of the internal proxy, which is not usually desirable.

The easiest way to add the required entry is to copy the example server.xml file provided with the glyptodon-guacamole package, replacing the old /etc/tomcat/server.xml:

$ sudo cp /usr/share/guacamole/server.xml /etc/tomcat/

The example server.xml file defines:

  • A single HTTP connector listening on port 8080.
  • RemoteIpValve with all settings at their default values.

By default, the RemoteIpValve will trust "X-Forwarded-For" from all private networks (, and both IPv4 and IPv6 localhost). If you need this range to be narrowed, or if you have already made manual edits to server.xml, you will need to make these changes manually.

If editing server.xml manually (rather than using the example server.xml), a <Valve> which trusts "X-Forwarded-For" from most common private addresses would be specified as:

<Valve className="org.apache.catalina.valves.RemoteIpValve"/>

This <Valve> must be added within the relevant <Host> section. In most cases, the easiest place to add this is simply toward the end of the server.xml file:


        <Valve className="org.apache.catalina.valves.RemoteIpValve"/>


If needed, this can be narrowed by providing your own value for the internalProxies attribute specifies a regular expression which matches the IP addresses of any proxies whose "X-Forwarded-For" headers should be trusted. For example, to trust only "X-Forwarded-For" received from localhost:

<Valve className="org.apache.catalina.valves.RemoteIpValve"

Applying the updated Tomcat configuration

Once an appropriate RemoteIpValve has been specified, Tomcat must be restarted to force rereading of server.xml:

$ sudo systemctl restart tomcat